Franklin stove how does it work

But his design was known then as the Franklin Stove, and it still is today. In that past two centuries, there have been many improvements. Benjamin Franklin, one of the Founding Fathers of our nation, was and is widely recognized as a genius. His inventions and remarkable achievements are numerous.

He even organized the first fire stations in Pennsylvania in because of the dangerous threat of fires at the time. Of all that he is justifiably credited with accomplishing, we especially appreciate the invention of the Franklin Stove. We Have Chimney Leaks! All Articles April Showers Bring…. Can Chimneys Get Repaired in the Winter? Do I Need Fireplace Doors? Wood Fireplaces: Which is best for you? Has My Chimney Had a Fire? How Does a Chimney Work?

Vents near the top expelled heat into the room. The flue would carry the smoke and ash first downward through the floor and then up the chimney. But in order for the smoke to flow properly, the fire needed to burn constantly to produce a proper draft. Therefore, his fireplaces often produced a poor draft since the smoke cooled too much passing through the siphon.

Also Rittenhouse changed the U-shaped flue system to an L-shaped system to allow for better smoke ventilation. Well-seasoned firewood is the fuel most often used in a Franklin stove. Check with local building codes for help in placing the stove the correct and safe distance from combustible walls.

The stove needs to be set on a fireproof pad as well, such as a metal sheet or a brick or rock platform. Check the distances from the walls, ceiling and furniture. Unpack the stove, if you purchased a new one, and tip it back to attach the three legs on the bottom, using the included bolts and washers.

Set the stove upright and locate the flue adapter and gasket, also included with a new stove. The rectangular flue piece goes over the hole, either in the top or rear of the stove box, to allow the smoke to escape up the chimney.

Position the fireproof gasket at the base of the flue adapter and tighten it onto the stove with the screws included in the kit. Set the grate and ashpan inside the the stove. The ashpan goes beneath the grate, which has slits in it for the ash to fall through. The ashpan often has a handle to help in removing the ashes. Set the stove in place on the fireproof platform or metal plate, and attach the chimney pipe to the flue, and then to the house chimney.

The house chimney should not be shared with any other stove.